Using atlas copco air compressors is a common phenomenon in today’s modern world. Whether you are using air compressors to move a pallet of goods from point A to point B, or whether you are using an air compressor to repair or maintain your vehicle, air compressors are now ubiquitous. Some industries are so reliant on air compressors that they practically rule the industry. Take the transportation industry: most vehicles run on diesel, so there is a need to keep the fleet on the road and running efficiently. To this end, air compressors are also used to increase the compression pressure, which is how tires develop traction and maintain a constant speed. The same is true for industries that produce, manufacture, or transport of sensitive products, such as chemicals, medical devices, and electronics.
Types Of Air Compressor
There are two primary types of atlas copco air compressor: electric and gas-powered. Gas compressors tend to be more portable and lighter, but are also more expensive to run and require an air compressor tank of higher capacity than electric compressors (for an average gas air compressor, roughly five cubic feet of capacity). Additionally, gas compressors do not have variable speed drives, unlike electric compressors, so they are only as fast as the engine they are powering. Bottled air compressors are typically used in bottling plants to minimize the residual air pressure in the tank, which is then released into the shipping container or truck. In industries where there is a need to maintain continuous speed, air compressors with multiple speed drives are more suitable, since continuous speed drives allow for more consistent pressure levels.
Most small to mid-sized businesses currently use small industrial air compressors for basic operations, such as heating and air conditioning systems and air sourcing and pumping. Larger businesses, especially those with higher annual volumes of air movement, will probably do better with a large industrial air compressor. There are several different sizes of industrial compressors, including industrial, counter-flow, reciprocating, and counter-rotating compressors.
Smaller business operations that do not require a lot of running time can get by with either an electric compressor or a gas compressor. Gas atlas copco air compressors tend to be more portable and lighter, and are usually more affordable to operate during seasonal business operations. For businesses that generate a lot of air tools for work, an industrial counter-rotating compressor will probably be the best choice. These are most often used to power air tools such as nailers and staplers.
Drawbacks And Issues With Some Compressors
There are a few drawbacks to using air compressors, both with small to mid-sized operations and large industries. Smaller businesses may not need all the power that larger industries do, and air compressors do not work well in cold environments. It can also be difficult to move large quantities of air compressors from one location to another, as they have a relatively short reach. Also, air compressors can be loud, especially the larger ones, and depending on the type of engine they run, can be harmful to the environment.
When using atlas copco air compressors, it is important to make sure that the proper safety precautions are taken. Most small compressors do not require air tanks to hold compressed air, so using them in a way that does not endanger yourself should be your primary concern. They should not be used to fill tires, towing a trailer, or to inflate a tent. If you have a gasoline compressor, it may not be safe to use because it might run without air when not in use, releasing carbon monoxide into the air. Make sure that you have adequate emergency air supply to use when using compressors.
Finding Good Deals On Air Compressors
In order to find good deals on air compressors, it is important that you take time to find the best deals available at the best prices. One of the key ways in which you can do this is finding the most energy efficient deals on air compressors. Doing this is one the best ways on which you can save on your overall costs.